General Purpose

Grid List

Set Descending Direction

1-10 of 17

Per Page
Page:
  1. 1
  2. 2
  1. E6100 NON SAG CART TUBE 10.2 OZ CLEAR
    $7.95

    E6100 INDUSTRIAL ADHESIVE E6100 has all of the strength of E6000 but this non-sag formulation won't slump or run and allows for maximum control. It's a perfect choice for overhead and vertical applications when nails just won't work. • Non-slump – won't sag, drip or run on vertical or horizontal applications • Tough – 2X stronger and 60X more flex than Polyurethane! • Non-flammable once cured • Chemical resistant – safe for applications exposed to dilute acids and dilute caustics • Waterproof – can be submerged in fresh and salt water after complete cure • Paintable – paint to match surrounding area or make UV-resistant • Temperature resistant – unaffected by extreme heat or cold once cured • Flexible – excellent for bonding items subject to vibration Learn More
  2. Flame Retardant Structural Epoxy Adhesive
    $19.95

    9200FR - FLAME RETARDANT STRUCTURAL EPOXY ADHESIVE The 9200FR Flame Retardant Structural Epoxy Adhesive is a two-part, flame retardant, thixotropic, toughened adhesive that is designed to create load bearing joints. It offers excellent adhesion to a wide range of difficult to bond to materials, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). The toughened adhesive protects against vibration damage when fully cured, but remains sufficiently flexible to accommodate thermal cycling stresses when bonding materials with different coefficients of thermal expansion. The 9200FR is electrically insulating and chemically resistant, which helps prevent corrosion damage. It has an excellent resistance to moisture, salt water, detergents, gasoline, hydraulic fluids, antifreeze, automotive fluids, acids, and bases. In addition, dissimilar metals can be bonded together without fear of causing galvanic corrosion because the adhesive prevents current flow through the bond. Applications & Usages This adhesive is primarily used to create long-lasting, load-bearing joints, especially in situations where vibration resistance is key or where dissimilar materials are being joined. It is especially suitable for sheet molding compound (SMC) and glass-reinforced plastics (GRP) bonding. It is thixotropic, which makes it a great gap filler and is sag resistant—perfect for use on vertical surfaces. It is also excellent for encapsulating electronics enclosures with holes or seams where a non-thixotropic potting compound would flow through. It provides superior environmental protection and performs very well under temperature cycling. Features Toughened, smooth, thixotropic paste 1:1 mix ratio Flame Retardant—Meets UL 94V-O Vertical Burn Test Working life: 30 minutes Cure temperature: 24 hours at room temperature Non-sagging and gap filling Very strong adhesion Bonds dissimilar materials Highly resistant to vibration and temperature cycling Extremely chemical resistance Low shrinkage Easy to dispense Learn More
  3. Structural Epoxy Adhesive
    $13.95

    The 9200 Structural Epoxy Adhesive is a two-part, thixotropic, toughened adhesive that is designed to create load bearing joints. It offers excellent adhesion to a wide range of difficult to bond to materials, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). The toughened adhesive protects against vibration damage when fully cured, but remains sufficiently flexible to accommodate thermal cycling stresses when bonding materials with different coefficients of thermal expansion. The 9200 is electrically insulating and chemically resistant, which helps prevent corrosion damage. It has an excellent chemical resistance to moisture, salt water, detergents, gasoline, hydraulic fluids, antifreeze, automotive fluids, acids, and bases. In addition, dissimilar metals can be bonded together without fear of causing galvanic corrosion because the adhesive prevents current flow through the bond. Applications & Usages This adhesive is primarily used for creating long lasting load bearing joints, especially in situations where vibration resistance is key or where dissimilar materials are being joined. It is especially suitable for sheet molding compound (SMC) and glass-reinforced plastics (GRP) bonding. It is thixotropic, which makes it a great gap filler and is sag resistant—perfect for use on vertical surfaces. It is also excellent for potting electronics, especially when the enclosure has holes or seams where a nonthixotropic potting compound would flow through. It provides superior environmental protection and performs very well under temperature cycling. Features Toughened, smooth, thixotropic paste 1:1 mix ratio Working life: 30 minutes Cure time: 24 hours at room temperature Non-sagging and gap filling Very strong adhesion Bonds dissimilar materials Highly resistant to vibration and temperature cycling Extreme chemical resistance Low shrinkage Easy to dispense Learn More
  4. Structural Epoxy Adhesive
    $8.95

    The 9200 Structural Epoxy Adhesive is a two-part, thixotropic, toughened adhesive that is designed to create load bearing joints. It offers excellent adhesion to a wide range of difficult to bond to materials, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). The toughened adhesive protects against vibration damage when fully cured, but remains sufficiently flexible to accommodate thermal cycling stresses when bonding materials with different coefficients of thermal expansion. The 9200 is electrically insulating and chemically resistant, which helps prevent corrosion damage. It has an excellent chemical resistance to moisture, salt water, detergents, gasoline, hydraulic fluids, antifreeze, automotive fluids, acids, and bases. In addition, dissimilar metals can be bonded together without fear of causing galvanic corrosion because the adhesive prevents current flow through the bond. Applications & Usages This adhesive is primarily used for creating long lasting load bearing joints, especially in situations where vibration resistance is key or where dissimilar materials are being joined. It is especially suitable for sheet molding compound (SMC) and glass-reinforced plastics (GRP) bonding. It is thixotropic, which makes it a great gap filler and is sag resistant—perfect for use on vertical surfaces. It is also excellent for potting electronics, especially when the enclosure has holes or seams where a nonthixotropic potting compound would flow through. It provides superior environmental protection and performs very well under temperature cycling. Features Toughened, smooth, thixotropic paste 1:1 mix ratio Working life: 30 minutes Cure time: 24 hours at room temperature Non-sagging and gap filling Very strong adhesion Bonds dissimilar materials Highly resistant to vibration and temperature cycling Extreme chemical resistance Low shrinkage Easy to dispense Learn More
  5.  Label & Adhesive Remover Pen
  6. RTV, NON CORROSIVE 3oz Tube Translucent
    $15.97

    Out of stock

    1-Part Adhesive Sealant 1035

    A spreadable, non-corrosive, translucent paste. Excellent for the sealing and bonding of electronic components onto printed circuit boards and protecting copper connections on electronic parts assemblies. Excellent as a weather proofing sealant where power cords enter motors. Use as a gasket for leak resistant sealing and insulating.

    Retains elastomeric properties for long periods at temperatures from -60C to 204C (-75F to 399 F). Recommended for marine applications.

    Learn More
  7. UV-6800 3.7fl. oz  Clear Medium Viscosity
    $6.95

    E6800 INDUSTRIAL ADHESIVE E6800 has all the adhesion power of E6000 but the formula is enhanced with UV stabilizers. It is ideal for outdoor applications. E6800 easily bonds to fiberglass, concrete, metal, glass, wood and more! • UV resistant – resists yellowing and cracking when used outdoors • Tough – 2X stronger and 60X more flex than Polyurethane! • Non-flammable once cured • Chemical resistant – safe for applications exposed to dilute acids and dilute caustics • Waterproof – can be submerged in fresh and salt water after complete cure • Paintable – paint to match surrounding area • Temperature resistant – unaffected by extreme heat or cold once cured • Flexible – excellent for bonding items subject to vibration Learn More
  8. E6000 Clear, 3.7 Oz Tube
    $3.95

    E6000 provides adhesion strength and versatilty not found in Silicones and rubber cements. Its strength in adhesing metals, glass, rubber and plastics and it's self-leveling feature makes it useful as a potting material in electrical and computer applications. E6000 INDUSTRIAL ADHESIVES ADHERE TO MORE SURFACES WITH GREATER STRENGTH THAN OTHER ADHESIVES Learn More
  9. E6000 BLACK, 3.7 Oz Tube
    $4.95

    E6000 provides adhesion strength and versatilty not found in Silicones and rubber cements. Its strength in adhesing metals, glass, rubber and plastics and it's self-leveling feature makes it useful as a potting material in electrical and computer applications. E6000 INDUSTRIAL ADHESIVES ADHERE TO MORE SURFACES WITH GREATER STRENGTH THAN OTHER ADHESIVES Learn More
  10. E6000 1 OZ Tube Clear
    $2.50

    E6000 provides adhesion strength and versatilty not found in Silicones and rubber cements. Its strength in adhesing metals, glass, rubber and plastics and it's self-leveling feature makes it useful as a potting material in electrical and computer applications. E6000 INDUSTRIAL ADHESIVES ADHERE TO MORE SURFACES WITH GREATER STRENGTH THAN OTHER ADHESIVES Learn More

Grid List

Set Descending Direction

1-10 of 17

Per Page
Page:
  1. 1
  2. 2
Refine By
Newsletter
Get offer updates Directly your mail inbox!
Get Newsletter